Bühler Technologies GmbH
English
Downloads ()

Gas cooler series RC 1.1

Gas cooler series RC 1.1

  • Compact design: Pre-installed and ready to connect
  • Choose from one or two gas paths
  • Heat exchanger made from stainless steel, Duran glass and PVDF
  • Adjustable outlet dew point and alarm thresholds
  • Cooling block temperature display
  • Status display and output
  • Rated cooling power 360 kJ/h
  • Constant dew point stability ± 0.1 °C
  • Optional 4 - 20 mA or Modbus RTU signal output
  • Moisture detector, filter and condensate pump optional
  • Successor to the EGK 1/2 and EGK 1SD

Many gas analysis processes require extracting sample gas from the process. This also extracts process-related contamination such as particles or moisture. These can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The sample gas cooler reduces the gas temperature to below the dew point for this purpose, causing moisture to drop out, which is then discharged as condensate.

In addition to the status output to monitor the sample gas cooler function, we offer an optional 4 – 20 mA analog output or digital interface. The process control can access the process and diagnostic data via the Modbus RTU interface as well as configure the device settings.

The RC 1.1 is a compressor sample gas cooler designed for high cooling output and high ambient temperatures. Depending on the application, it can be configured with one or two gas paths. This makes it a vital cooling component in sophisticated analysis systems.