Temperature sensors : Bühler Technologies GmbH

Temperature sensors

MK2-G1/2 / EK2-G1/2

Analogue output 4-20 mA
Continuous temperature measurement
Nearly any length of cable connection between sensor and control unit
Sensor length up to 1 m / 3.3 ft
Brass or stainless steel housing
Various plug options

TF-M/E-G1/2

Pt100 temperature sensor
Continuous temperature measurement
Sensor length up to 1 m / 3.3 ft
Brass or stainless steel housing
Various plug options

TF-M-VAL

Temperature sensor Pt100 with spring
Pt100 temperature sensor
Continuous temperature measurement
Integrated spring for variable sensor length
Various plug options

Changes in the viscosity of hydraulic oil and lubricants due to the temperature requires precisely monitoring and stabilising the operating temperature.
Carefully monitoring the temperature further also affects the service life of the oils. The oil tank is generally accepted as the control point for the oil temperature, which will usually provide helpful averages. It may further be helpful to also monitor segments or individual units within a system.
The values determined from the measuring points must be transferred to the system control according to standards. For safety reasons, it is advisable to at a minimum display the current oil temperature on the oil tank.
The comprehensive line of system-compatible temperature sensors is tailored specifically for use in hydraulics and lubrication technology.